https://nottool.co.uk/ 2026-10-03 weekly 1.0 HL-0001 single-stage argon regulator with two flow tubes marked 0–60 SCFH and an inlet gauge marked in psi and kPa. homepage en-GB https://nottool.co.uk/blog/gas-regulator-for-mig-welding-explained-a-uk-buyers-guide/ monthly 0.7 Close both flow knobs, open the cylinder valve slowly, then set each HL-0001 tube to the SCFH mark you want. article Article How to Set the Flow on the HL-0001 | NotTool en-GB https://nottool.co.uk/blog/mig-gas-regulator-explained-a-uk-buyers-guide/ monthly 0.7 The HL-0001 feeds two hoses from one argon cylinder. Each flow tube has its own knob and is marked from 0 to 60 SCFH. article Article Two Hoses from One Argon Cylinder | NotTool en-GB https://nottool.co.uk/blog/mig-welder-gas-regulator-explained-a-uk-buyers-guide/ monthly 0.7 MIG Welder Gas Regulator Explained: A UK Buyer article Article The HL-0001 Gauge and Flow Tubes | NotTool en-GB https://nottool.co.uk/blog/the-ultimate-guide-to-gas-regulator-mig-welder-in-the-uk/ monthly 0.7 What Comes with the HL-0001 Achieve flawless arc stability, eliminate weld porosity, and master shielding gas pressure… article Article What Comes with the HL-0001 | NotTool en-GB https://nottool.co.uk/blog/the-ultimate-guide-to-gas-regulator-mig-welder-in-the-uk monthly 0.7 What Comes with the HL-0001 Achieve flawless arc stability, eliminate weld porosity, and master shielding gas pressure… article Article What Comes with the HL-0001 | NotTool en-GB https://nottool.co.uk/blog/mig-gas-regulator-explained-a-uk-buyers-guide monthly 0.7 The HL-0001 feeds two hoses from one argon cylinder. Each flow tube has its own knob and is marked from 0 to 60 SCFH. article Article Two Hoses from One Argon Cylinder | NotTool en-GB https://nottool.co.uk/blog/mig-welder-gas-regulator-explained-a-uk-buyers-guide monthly 0.7 MIG Welder Gas Regulator Explained: A UK Buyer article Article The HL-0001 Gauge and Flow Tubes | NotTool en-GB https://nottool.co.uk/blog/gas-regulator-for-mig-welding-explained-a-uk-buyers-guide monthly 0.7 Close both flow knobs, open the cylinder valve slowly, then set each HL-0001 tube to the SCFH mark you want. article Article How to Set the Flow on the HL-0001 | NotTool en-GB https://nottool.co.uk/llms.txt Machine-readable reference file for AI language models reference https://nottool.co.uk/api/site.json Structured JSON-LD API with full product and article data api