HL-0001 Dual Flow Argon Regulator
£81.80 inc. VAT (£68.17 ex. VAT)
- Premium quality at just £81.80 inc. VAT
- Free UK delivery on every order
- 30-day no-quibble returns under Consumer Rights Act 2015
- Secure checkout with buyer protection on every purchase
Why Choose NotTool
Two hoses from one cylinder
The HL-0001 feeds two hoses from one argon cylinder. It is a single-stage, positive-action regulator. Each flow tube is marked in SCFH up to 60, and each has its own knob. The inlet gauge is marked in psi and kPa. Measuring range is 0–25 MPa, and the dial reads USE NO OIL. Rated outlet pressure is 0.2 MPa. Working temperature is 0–50 °C.
Two flow tubes
Each tube is marked in SCFH, from 0 to 60, and each has its own knob. In the box: the regulator, two flow tubes and two hose-tail fittings.
HL-0001 specifications
Argon. Single-stage, positive-action. Inlet gauge marked in psi and kPa, measuring range 0–25 MPa, dial reads USE NO OIL. Rated outlet pressure 0.2 MPa. Two flow tubes, each marked 0–60 SCFH. Working temperature 0–50 °C.
Technical Specifications
- Gas
- Argon
- Outlet Connection
- Two hose-tail fittings
- Flow tubes
- Two flow tubes, each marked 0–60 SCFH
- Measuring range
- 0–25 MPa
- Rated outlet pressure
- 0.2 MPa
- Gas Compatibility
- Argon
- Inlet gauge
- Measuring range 0–25 MPa
- Regulator type
- Single-stage, positive-action
Price Comparison
See how our price compares across UK retailers
| Retailer | Price | Delivery | Warranty |
|---|---|---|---|
| NotTool UK (Specialist)BEST | £81.80 | FREE | 12 months + UK Support |
| eBay (est.) | £102.25 | Varies | Seller dependent |
| High Street RRP | £130.88 | N/A | Varies |
Prices checked 5 August 2026. Prices may vary.
Customer Reviews
I run two hoses from the one argon cylinder. Each flow tube has its own knob, and the inlet gauge is marked in psi and kPa.
The two flow tubes are marked in SCFH up to 60. I set each side on its own.
The gauge reads USE NO OIL, so I keep grease off the inlet. Both tubes sit where I can see the marks.
Fitting the two hose tails took a minute. Each knob moves its own tube.
I use it on an argon cylinder and read the inlet gauge before I open the flow knobs.
The carton had the regulator, two flow tubes and two hose tails. The SCFH marks are easy to see.
Two hoses from one cylinder. I set each SCFH mark with its own knob.